Valve Drive 230 V

Thermal valve drive opens and closes valves of heating manifolds, radiators and convection heaters for comfortable demand-based regulation of the indoor climate

Valve Drive 230 V Valve Drive 230 V Valve Drive 230 V Valve Drive 230 V Valve Drive 230 V Valve Drive 230 V
Valve Drive 230 V
Valve Drive 230 V
Valve Drive 230 V
Valve Drive 230 V
Valve Drive 230 V
Valve Drive 230 V
Highlights
  • Individual application and control options:
    • in conjunction with Homematic IP Floor Heating Actuators (HmIP-FAL230-C6 or HmIP-FAL230-C10)
    • directly via the Homematic IP Wall Thermostat with switching output – for brand switches (HmIP-BWTH)
    • conventionally via electromechanical wall thermostats
  • Very low power consumption (only 1 Watt power consumption)
  • If voltage is not applied, the valve drive holds the valve closed (Normally Closed)
  • Silent opening and closing of valves within only 3 minutes (typically)
  • Easy installation without any tools and snap-on fastening
  • Patented sealing method (IP54) protects against splash water from outside. Thus, the drive can be mounted as required (360° mounting position)
  • With the adapter VA80 (part no. 154373A2), it can be used for valves from the most popular manufacturers like Heimeier, MNG, Junkers, Honeywell-Braukmann, Oventrop, Comap, Schlösser and many more with a thread size of M30 x 1.5 mm
  • Installation on valves of other manufacturers is possible using corresponding adapters

The valve drive for 230 or 24 V permits comfortable climate control by opening and closing of the valve on the heating manifold, radiator or convector as required. The valve drive can be controlled via one of the following devices as desired: Conveniently in combination with the Homematic IP Floor Heating Actuators, directly via a Homematic IP Wall Thermostat with switching output or conventionally via an electro-mechanical wall thermostat. The valve drive, connected with no voltage applied, silently opens or closes the valve in around three minutes at a maximum power consumption of only one watt. Thanks to the patented sealing procedure (IP54), the valve drive is reliably protected against spray water whereby it can be assembled in the desired installation position. Assembly is quick and simple with the aid of the appropriate VA80 valve adapter (Art. 154373A2), by clicking in the valve drive on the valve. The adapter can be universally used for all valves with a thread size of M30 x 1.5 mm from the most popular manufacturers such as Heimeier, MNG, Junkers, Honeywell-Braukmann, Oventrop, Comap, Schlösser and many more.

Technical Specifications
Supply voltage
230 V AC 50/60 Hz
Operating performance
1 W
Max. inrush current
550 mA
Closing force
100 N ± 5 %
Closing or opening duration
approx. 3 minutes
Stroke
4.0 mm
Degree of protection
IP54
Ambient temperature
-25 to +60 °C
Connection
M30 x 1.5 mm (order adapter separately)
Connection cable
1 m, permanently installed
Dimensions (W x H x D)
44 x 54 x 50 mm (incl. connecting cable)
Weight
100 g
Ordering Informations
Item Number
170016
EAN Code
4031602008084
Package
100
Dimesions incl. Packaging
74 x 89 x 50 mm
Weight incl. Packaging
130 g
Downloads
Product Data Sheet

Combination Recommendations