Homematic IP CO2 Sensor, 230 V

This reliable sensor from Homematic IP measures the CO2 content in the room. It displays the current CO2 load via five integrated LEDs as well as via the Homematic IP app.

Homematic IP CO2 Sensor, 230 V Homematic IP CO2 Sensor, 230 V Homematic IP CO2 Sensor, 230 V Homematic IP CO2 Sensor, 230 V Homematic IP CO2 Sensor, 230 V Homematic IP CO2 Sensor, 230 V
Homematic IP CO2 Sensor, 230 V
Homematic IP CO2 Sensor, 230 V
Homematic IP CO2 Sensor, 230 V
Homematic IP CO2 Sensor, 230 V
Homematic IP CO2 Sensor, 230 V
Homematic IP CO2 Sensor, 230 V
Highlights

VERSATILE SENSOR FOR ENHANCED WELL-BEING

This high-quality and reliable CO2 sensor measures the CO2 content in ppm. Along with the CO2 load, the sensor also measures the temperature and humidity in the room. The current measured values for the room air can always be viewed via the Homematic IP app.

 

LED DISPLAY AS CO2 INDICATOR

The five integrated LEDs show the CO2 load directly on the device. One lit LED indicates very good air quality, whereas five lit LEDs indicate a very high CO2 value. Regular and thorough ventilation can counteract the high CO2 load. In addition, it is also possible to define a light as an automatic alarm via a set threshold when a specified CO2 level has been reached.

 

HIGHLY FLEXIBLE DUE TO ITS MODULAR DESIGN

Because of its flexibly combinable design, the CO2 sensor can be integrated into existing switch systems (with 55 mm frames) from the most popular manufacturers (www.homematic-ip.com provides an overview of compatible manufacturers).

 

EASY TO INSTALL

Compact housing for easy installation in standard flush-mounted boxes. The installation is made even easier due to the screw-free, spring-loaded terminals.

Description

The Homematic IP CO2 Sensor reliably and accurately measures the CO2 concentration, temperature and humidity in your smart home. This enables automatic monitoring of the indoor air quality. With the free Homematic IP smartphone app, you can always keep an eye on the measured values.

The device can be easily mounted in a flush-mounted box. In addition to the phase, a neutral conductor is also required for the connection.

An additional relay output enables the device to control a connected consumer, e.g. a lamp. The light can be easily switched via remote controls, wall-mounted push-buttons, motion detectors or via the Homematic IP app. A flush-mounted box can thus be used simultaneously for the CO2 sensor and for light control.

Thanks to its 55 mm design, the sensor can be easily integrated into existing frames of common brand manufacturers. The design, colours and surfaces of switches already installed remain unchanged.

Technical Specifications
Supply voltage
230 V/50 Hz
Standby power consumption
0.55 W
Max. switching capacity
1150 W
Kind of load
ohmic load
Relay
changeover contact
Cable type and cross section
rigid and flexible cable, 0.75-1.5 mm²
Installation
only in normal commercial switch boxes (device boxes) in accordance with DIN 49073-1
Degree of protection
IP20
Ambient temperature
5 to 35 °C
Dimensions (W x H x D):
without frame
71 x 71 x 54 mm
with frame
86 x 86 x 54 mm (depth for flush mounting: 32 mm)
Weight
125 g
Radio frequency band
868.0-868.6 MHz/869.4-869.65 MHz
Typ. open area RF range
230 m
Ordering Informations
Product Name
HmIP-SCTH230
Item Number
155592A0
EAN Code
4047976555925
Package
60
Dimesions incl. Packaging
122 x 112 x 73 mm
Weight incl. Packaging
241,9 g
Downloads
Manual
Product Data Sheet
Declaration of conformity

Combination Recommendations