Dimming Actuator flush-mount – trailing edge

Flush-mount dimming actuator allows dimming and switching of connected dimmable LED light sources, dimmable energy-saving lamps, LV and HV halogen lamps as well as incandescent lamps

Dimming Actuator flush-mount – trailing edge Dimming Actuator flush-mount – trailing edge Dimming Actuator flush-mount – trailing edge Dimming Actuator flush-mount – trailing edge Dimming Actuator flush-mount – trailing edge Dimming Actuator flush-mount – trailing edge
Dimming Actuator flush-mount – trailing edge
Dimming Actuator flush-mount – trailing edge
Dimming Actuator flush-mount – trailing edge
Dimming Actuator flush-mount – trailing edge
Dimming Actuator flush-mount – trailing edge
Dimming Actuator flush-mount – trailing edge
Highlights
  • Optimised for modern light sources and therefore ideal for small loads (e.g. LED)
  • Modern, fully electronic trailing edge dimmer for quiet operation without noise emission (if compared to older dimming models)
  • The Homematic IP app offers infinitely variable dimming of connected lights in 1 percent steps
  • Low current consumption
  • Compact design offers easy installation in flush-mounted boxes or in surface-mounted junction boxes (e.g. ELS
    Spelsberg Abox 25) for operation in basements or outdoor areas
  • Easy to install thanks to screwless clamps
  • Comfortable control via Homematic IP app and via Homematic IP Remote Control
  • Comfortable and individual voice control (e.g. via Amazon Alexa or Google Assistant)
  • To enable operation, the device has to be connected with one of the following solutions:
    - Homematic IP Access Point with free smartphone app and free cloud service
    - Central Control Unit CCU2/CCU3 with local user interface WebUI
    - Third-party solutions of partners
Description

The Homematic IP Dimming Actuator flush-mount – trailing edge is part of the Homematic IP smart home system and can be used for switching and dimming of lights. The compact design of the dimming actuator allows comfortable installation in flush-mounted boxes or surface-mounted junction boxes. Available light systems can be upgraded and controlled via remote control, push-button or the free smartphone app in just a few single steps, using the existing cables. As the device is a trailing edge dimming actuator, it is compatible especially for classic incandescent lamps, halogen lamps, dimmable energy-saving lamps as well as for most dimmable LED lamps. The fully electronic trailing edge dimming actuator is optimised especially for energy saving light sources with a switching capacity between 3 and 80 VA. Modern electronics provides operation without any noise emission. After integration of the dimming actuator into the Homematic IP system, the light output can be dimmed in 1 percent steps.

Technical Specifications
Supply voltage
230 V/50 Hz
Current consumption
0.35 A
Max. switching capacity
80 VA
Minimum load
3 VA
Standby power consumption
0.4 W
Dimming method
Reverse phase control
Load type
Ohmic and capacitive lamp load
Cable type and cross section
Rigid and flexible cable, 0.75-1.5 mm²
Installation
In flush-mounted boxes (device boxes) according to DIN 49073-1 and in ELS Spelsberg junction boxes (e.g. Abox 25 and Abox 40)
Degree of protection
IP20
Ambient temperature (operation)
-10 to +55 °C
Dimensions (W x H x D)
54 x 33 x 41 mm
Weight
31 g
Radio frequency
868.3 MHz/869.525 MHz
Typ. open area RF range
180 m
Ordering Informations
Product Name
HmIP-FDT
Item Number
150609A0
EAN Code
4047976506095
Package
90
Dimesions incl. Packaging
122 x 112 x 48 mm
Weight incl. Packaging
117,4 g
Downloads
Manual
Product Data Sheet
Declaration of conformity

Combination Recommendations